Ive never been able to see or get the Power Cycle command (in winbox) to work (or do anything at all).
ie i should be able to click it, select eth4 , set duration to 5s or 10s, and then poe OUT on eth4 should be set to off, for 5/10s then come back on (to thus power cycle what ever device is getting POE from the MT's eth4) - nothing happens (ever, ive tried to use this many times, always have to manually do it via poe menu or write a script)
same on most recent rOS, as well as older versions (ie 6.38...)
ive tried this on many hex POE (pgs960) and many other devices.
nothing happens at all (ie poe out does not get cycled).
what am i missing here?
(im talking about this fucntion):